radio-resource-measurement

Enables support for 802.11k radio resource measurement capabilities (IEEE 802.11k) on this WLAN. 802.11k improves how traffic is distributed. In a WLAN, devices normally connect to the access point with the strongest signal. Depending on the number and location of clients, this arrangement can lead to excessive demand on one access point and under utilization of others, resulting in degradation of overall network performance. With 802.11k, if the access point with the strongest signal is loaded to its capacity, a client connects to an under-utilized access point. Even if the signal is weaker, the overall throughput is greater since it is an efficient use of network resources. This feature is enabled by default.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

radio-resource-measurement {tpc-report|neighbor-report {hybrid}}

Parameters

radio-resource-measurement {tpc-report|neighbor-report {hybrid}}


radio-resource-measurement	Enables support for 802.11k radio resource measurement capabilities
channel-report	Optional. Includes the channel-report element in beacons and probe responses
neighbor-report {hybrid}	Optional. Enables responding to neighbor-report requests hybrid – Optional. Uses the hybrid model of smart-rf neighbors and roaming frequency to neighbors
tpc-report	Optional. Includes the tpc-report element in beacons and probe responses

Examples

ap505-13403B(config-wlan-test)#radio-resource-measurement neighbor-report hybrid

ap505-13403B(config-wlan-test)#show context
wlan test
 ssid test
 vlan 1
 bridging-mode local
 encryption-type gcmp256
 authentication-type eap
 dynamic-vlan-assignment allowed-vlans 2-4
 protected-mgmt-frames mandatory
 protected-mgmt-frames sa-query attempts 1
 radio-resource-measurement neighbor-report hybrid
 use aaa-policy test
 http-analyze syslog host 10.234.160.4 port 21 proxy-mode through-controller
 controller-assisted-mobility
 opendns device-id 0014AADF8EDC6C59
 dpi metadata http
ap505-13403B(config-wlan-test)#

Related Commands


no (wlan-config-mode)	Disables support for 802.11k radio resource measurement capabilities (IEEE 802.11k) on this WLAN